Workout Wednesday - 08 January 2014


I think it's time to revisit the fun that's lactic acid tolerance - cleverly disguised as a speed endurance / threshold set.  Yes, these hurt, but they're oh-so-good for you.

No fancy fanfare here.  Let's just get right to it.  This is a big set, and takes about 1:15 - 1:30 in time. This was written for SCY, and as you can see has very aggressive send-offs.  It was written for a couple athletes in my swim club that maintain a repeat base-100 time of around 1:10.

Basically, it's base + :25, :20, :15, :10 for the 100's.  And for the 50's, take your (or your athletes) hard 50 time and add :20, :15, :10, :05.

Enjoy!

Warm up:
300 easy.
4 x 50 kick on :30 rest
200 pull

4 x (50-75-100)
On 1:00, 1:15, 1:40, 1:45

Main set: 
5 x 100 on 1:35
5 x 50 on :50
4 x 100 on 1:30
4 x 50 on :45
3 x 100 on 1:25
3 x 50 on :40
2 x 100 on 1:20
2 x 50 on :35

4 x 150 pull on 2:20

Cool down: 
200

4600 yards.

Should you have any questions on the workout posted here - or on any of the previous workouts we've provided - drop me a line and I'll get back to you.

Workout Wednesday - Happy 2014 Edition

Happy New Year!  We here at Podium Training sincerely hope that everyone has had a safe, happy, and healthy holiday season.

Now, let's kick off 2014 properly - with a steady state high end aerobic workout. You'll get your HR into Z4 on this one..... almost threshold here.  This is a great set to work on the aerobic energy system.

If you recall, last week we talked a little bit about energy systems.  This set will get the HR up, but you have to be sure that you, or your athletes, keep tabs on HR between efforts.  If heart rates start to creep up towards threshold, then the send-off is too tight and you'll need to adjust.

This workout is written for SCY and will take just about an hour.  It's a great set for a mid-day, or before work session.

Warm up:
300 easy
200 kick

4 x 100 pull on 1:40

Main set:
7 x (150 - 250)  
1:55 / 3:20  -  2:10 / 3:30 

Cool down:
200 easy.

3500 yards

As always, if you have any questions on any of the sets here, please let me know.  I'll get back to you ASAP.

Happy New Year!

Stroke Rate, Distance Per Stroke, and Why You're Probably Doing It Wrong

I've heard many a coach tell their athletes that targeting a low stroke rate in their swim is one of the benchmarks of improvement and efficiency. Yes, a swim stroke with a low stroke rate looks smooth and efficient, but you can't talk about stroke rate without looking at pace, and distance per stroke as well. Why do we need to look at all of these metrics?

A low stroke rate is usually indicative of a long glide phase in the front-quadrant of the stroke.  Having a low stroke rate and a long glide phase isn't always beneficial, especially in the sport of triathlon, when you're in the open water.

Before I continue further, let's define - simply - distance per stroke, and stroke rate:
  • Distance Per Stroke:  How far you go, or have gone, every time your hand enters the water.
  • Stroke Rate:  How fast you turn your arms over and have a hand enter the water.
So, this isn't to say that having a front-quadrant focused swim means you're going to be slow. You can be a very fast swimmer with a lower stroke rate and a front quadrant based stroke.  You'll just have shoulders as wide as Sun Yang - and you'll have to carry that extra muscle weight on the bike, and more importantly, on the run.  (As an aside, it's worth the time to watch the 1,500 meter finals from the 2012 Olympics if you didn't see it live.  It's an amazing swim, and you'll see what I mean by front-quadrant, glide phase, and wide shoulders.)

I recently participated in a course for USA Swimming coaches, and there was a section where coach Jonty Skinner discussed distance per stroke and stroke rate (which moving forward I'll refer to as DPS, and SR).  Mr. Skinner is a wealth of information, and he really summed up how you need to look at the relationship between DPS and SR. So how can we look at these two factors in an easy to understand context?
  • In regards to SR:  A .03 second increase, per stroke cycle, over 50 meters and you can potentially see up to a .4 second improvement.  Over 200 meters this could yield up to 1.5 seconds depending on your number of strokes.
  • In regards to DPS:  A 1 inch improvement (one more inch in your DPS) and you can expect almost the same relative impact.   That is to say, potentially, up to a .4 second gain per 50 meters or up to 1.5 seconds over 200 meters depending on how many strokes you're taking.
Another way to look at DPS and SR:  A really fast SR - where the swimmer is just thrashing their way though the water - almost always yields a minimal DPS.  And, a really slow SR almost always yields a slow swim.

There's a huge potential of time savings waiting to be tapped here.  And on paper this looks to be a very simple, and easy, improvement to make.  But these changes don't come easily.  Muscle memory, cardio load, form and mechanics - they all come into play here.

To that point, I am fortunate to be friends with an athlete here in Colorado Springs who, now retired, was a pro triathlete and a resident at the Olympic Training Center as a member of the national team.  He and I were chatting the other day and this topic came up (in a round-about way) as he was telling me about his arrival at the OTC and his jump to being a professional triathlete.  He was a great swimmer in high school, and was leading most sets in the pool, and was easily one of the fastest swimmers at the OTC. However, he'd get to an ITU triathlon event and he would be in the back-half of the swimmers coming out of the water.  He became so frustrated - and didn't understand how he could be swimming so poorly - that he was soon seeing the team Psychologist thinking it was a mental block.



What was going on?  He had a long glide phase, and in the open water the early part of his stroke was caught up in air bubbles and cavitation in the water from the swimmers ahead of him.  By shortening the glide phase of his stroke, and increasing his stroke rate, he was catching water - the anchor phase the stroke - much quicker, and his open water swim improved.  This didn't happen overnight.  It took time, and a lot of work.

A great example of a high stroke rate being a key factor in open water triathlon swimming success is Sara Haskins.  She has one of the highest SR's around in regards to pro women triathletes.  She might not be the fastest in a pool, but she's dangerous, and very quick, in the open water.

So how does one look at, and measure stroke rates, with an athlete?  The easiest way is to time it.  Time 10 stroke cycles, starting the stopwatch on the first right arm entry.  Count 10 strokes and stop timing.  Do that for every lap in a longer set.  Now you have your baseline stroke rate for your athlete, and you can take that information and measure it for comparison over time to gauge improvements. Additionally, so long as the data is readily available, you can also measure that data against other athletes.

Looking at distance per stroke isn't difficult either, but it takes a bit more time.  Video of your athlete swimming is the best way to gather this data.  Using your favorite video tool, Silicon Coach for example, you can mark the hand entry point of the left or right hand on the screen.  Then, as the video progresses, you can mark the next entry point of that same hand.  By using the measuring tool in your software to identify the width of each float on the lane line, you can then measure and determine the distance traveled during each full stroke cycle.  

How does this equate with the targeted swimming goals and individual metrics of your athlete?  You can look at it as simply as targeting a 50 meter swim at “X” stroke rate with “Y” distance per stroke.  Working on technique and efficiency is critical to improvements here.  Over time, by working on form and mechanics, a similar stroke rate can then yield a larger distance per stroke.  Then, by working on turnover, mechanics, and reducing the glide phase, you can increase stroke rate - thus finding improvements all around.

I'll be presenting a webinar on this topic on Thursday the 30th of January.  Announcements, and links to sign up for the webinar, will be coming soon from Vanguard Endurance.  This webinar will carry USA Triathlon CEU credit for all you coaches out there.  I'll be covering, in-depth, topics on stroke rate, distance per stroke, and the importance of form and stroke mechanics.

By the way - here's a link to the Mens 1,500 meter final from the 2012 Olympics.  You'll have to click the link to watch it on YouTube (content from the IOC and all) Enjoy!

Workout Wednesday - Christmas Day Special

It's Christmas, and there's no way you could have gotten out and swam this morning.  And if you somehow did find a pool that was open, you should go home now and spend time with your friends and family!  But, like a lot of athletes I know, you're itching for a workout and can't wait for the aquatics center to open up on the 26th.  So, what to do?


As I'm working on a blog post covering pre-season training, and the need to focus on speed endurance and speed, I thought I would whip up a simple set to focus on this.  First, a refresher on two of your energy systems:

Anaerobic Glycolysis Energy System.
  • Uses glycogen to generate energy.  glycogen is a carbohydrate that is stored in your muscular system.  It's broken down when energy demands are high.
  • This pathway provides energy for high intensity activities lasting from 10 seconds to 2 minutes.
Aerobic Energy System
  • Uses oxygen in the process of generating energy.
  • Used when activity lasts longer than about 2 minutes.  It’s also used for activities shorter than one minute, but the contribution is very small.
Energy production can be held for a long period of time in the aerobic system.  But the intensity of work must be reduced.

So, to work the anaerobic/aerobic system, you need to build a main set that is between 600-2000 yards or meters in distance, lasting approximately 8-40 minutes.  You'll prescribe between :15 and :50 rest between each effort.

Good examples of a anaerobic/aerobic system based set are:

6 x 200 on :30 rest.
or 
10 x 100 IM on :45 rest.  

Of course a better way to structure this workout is to determine a firm sendoff.  If you know your athletes base 100 time, you can target an effort, say 200's at a 1:10 pace, and with :30 rest you could write the workout to fit your individual athletes.

So......need a good set for Thursday?  This is SCM and is about 1:15 in duration.

Warm up:
300 swim
200 kick
200 pull

8 x 75 build up on 1:30
.
Main set
6 x 200 on 2:50
1:10 pace target. (Adjust this send-off on the base time of you or your athlete - you want about :30 rest)

4 x 150 pull on 2:30
Easy / Moderate effort.
.
Cool down
200 easy.

3,900 yards

We here at Podium Training Systems hope you have a wonderful holiday.  Cheers!

Workout Wednesday - 18 December 2013

As most athletes are coming off of their down-time or off-season, it's now up to us as coaches to begin determining what's required for the upcoming pre-season training.  Additionally, as a coach, when you obtain new athletes you need to do your due diligence around their abilities, needs, and limiters so you can properly plan out the necessary remediation.

In the pool, this requires some testing (just as it does for the bike and run) to help determine these limiters, as well as determining their base-100 times for upcoming workouts.  Test sets are a great way to glean massive amounts of information about your athletes abilities and needs.  Not only can you visually obtain information on the stroke and mechanics of your athlete, but the data you get from these sets helps determine if they are aerobic or anaerobic in nature, or if they need speed, speed endurance, or strength endurance.

With new athletes, the test I use most frequently is the 100 / 400 set.  This is a set I came to appreciate from my work with Justin Trolle' over at Vanguard Endurance.  This is a brilliant set for determining a number of metrics from your athlete.  The set is as follows:

Warm up:
200-400 easy swim.
4 x 50 drills
6 x 50 on 1:10. Descending 1-4, 5-8

Main / Test set:
100 @ 90% effort.
:90 seconds rest.
400 @ 100% effort (or as hard as they can go).

At this point, you can include whatever else you might want to have the athlete work on, but they're going to be fatigued.  Be sure to make it lower Z3 efforts, with not too much more volume.  In regards to the warm up - the athlete needs to be sufficiently warm and ready for the main set.  But don't overdo it.

The amount of data you glean from this set is massive.  You get an idea of their repeatable base-100 time (and no, it's not from the 100 time).  You also gain insight into their regression rates.  By that I mean, you have their 100 time - then you're comparing it to their splits in the 400.  This information starts to tell you about their aerobic or anaerobic abilities.

By that I mean: How much does their pace fall off? Does it continue to fall off as the 400 progresses, or is it a static decrease in pace?  What about their stroke rate?  Is their stroke rate increasing as their pace decreases? Or is their stroke rate decreasing as their pace decreases? These all mean different things, and require very different specificity of training to work on the limiters in question.

As your athletes progress, there are other great test sets that can be incorporated into their training to gauge improvements and set new benchmarks:

200m / 800m
3 x 400m
3 x 800m

All of these sets are great.  But they're used for different athletes, training for different race distances, and they yield results that need to be interpreted appropriately.

This is one of the most critical times of year as a coach (and athlete).  Make sure you take the time to do the proper analysis as the season begins so you can prescribe the appropriate training that focuses on the necessary energy systems.